3D HOOD AND FACE PROTECTION
This Wedze ski jacket has an integrated 3D hood that tightens automatically. It moves with your head without obstructing it, in order to provide better protection in bad weather. It is compatible with helmets.
The hood is preformed with a high collar for protecting the face in case of intense cold or strong wind. The flap of the zip closure is micro-perforated to facilitate breathing while protecting the face.
AIRTIGHT
AT THE CUFFS:
Wide, adjustable sleeves designed to fit over gloves. Elastane cuffs providing a perfect seal between the gloves and the jacket.
AT THE WAIST:
The snow skirt closes with press studs at the jacket hem. It prevents snow and draughts from entering when practicing wintersports, especially in the event of a fall. It is ideally combined with the BIB PROTECT salopettes to provide great protection for young freeriders.
Integrated removable liner jacket
70g/sqm wadding on the back and chest for good insulation. Ergonomic cut. Panel that provides warmth and freedom of movement at the arms. Two breathable panels at the side provide good ventilation. The wadded collar and hood provide excellent comfort at the neck. Added benefit: 2 side pockets!
Water repellency
The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. Our FREERIDE jackets are equipped with water repellent components that prolong their resistance to the weather. This is an additional technical solution for staying dry for as long as possible! You should repeat this treatment regularly using the products sold in our stores to maintain these properties.
Component waterproofing
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a fabric with a waterproof rating of 10000 mm is therefore resistant to the pressure exerted by a 10000 mm column of water
Breathability of a component
To find out if a fabric is breathable, we measure its total evaporative resistance RET (test based on the ISO 11092 standard). This is the capacity of the ski jacket to allow the water vapour produced by the body to escape during physical activity so that you stay dry. The lower the RET, the more breathable the fabric.
For example:
RET < 9 = extremely breathable fabric
/ 9 < RET < 12 = very breathable fabric /
12 < RET
< 20 = breathable fabric / RET > 20 = little or no breathability
How do we make a garment waterproof?
The waterproofing of the garment is related to its fabric, seam sealing, and assembly design.
Using a waterproof ZIP or adding a flap to the zip (covers the zips with a waterproof fabric flap).
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
What is the difference between a membrane and a coating?
This FREERIDE jacket has a membrane: it’s a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. More flexible, lightweight, durable & often more breathable than a coating, which is similar to a layer of paint applied to the inside the fabric making the component waterproof while remaining breathable.It makes the component waterproof while remaining breathable. It is often less costly than a membrane and requires a lining for protection.
Your product is repairable
This product is repairable.We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.
What is the RECCO® system?
With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time. All our Freeride jackets and trousers are equipped with the RECCO system.
TUTORIAL ON HOW TO WASH YOUR WATERPROOF GARMENT
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
Condition FAIR
- 100% functional - checked then cleaned by our experts - some elements may have been replaced - used product, having required repairs (sewing, patch or glue)
Control checkpoints
All our 2nd life products have been checked, reconditioned and repaired by our technicians.
- Integrity of outside fabric and lining
- Open / close function
- Integrity of outside and inside pockets
- Hood clamping function (*or cuffs, waist)
- Open/close function
- Buckles
- Belt / Straps
- Storage cover, hood and 1/2 pant leg present
- Down/feather distribution
- Water-repellent fabric
