DECATHLON
700x23/32 80 mm Presta Valve Inner Tube
This inner tube is suitable for 700 diameter, 23 to 32 section tyres with a 80 mm Presta valve.
700x23 to 700x32 inner tube with 80 mm Presta valve for 700 (28 inch) tyres.
Long valve for profiled rims, avoiding the need to use a valve extender.
ID 8545181
BENEFITS
Compatibility
700 diameter tyres, 23 to 32 mm across 80 mm Presta valve ETRTO 23/32 - 622
Waterproof
Optimised composition to ensure your inner tube has a good seal.
TECHNICAL INFORMATIONS
Choosing an inner tube:
To maintain your bike properly, it's important to know the exact dimensions of your tyres. This information appears on the tyre sidewall (diameter and width).For example, 27.5x1.90 means that the tyre is 27.5 inches in diameter and 1.90 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 50-584 means your tyre is 50 mm wide with an inner diameter of 584 mm (27.5 x 2.00).
To remove your inner tube, the tools you'll need are:
Use B'TWIN tyre changers to remove your used inner tube.
Checks to make before installing an inner tube:
A poorly maintained rim or a tired rim base can ruin your new inner tube.Check carefully.
How to change an inner tube
To make it easier to set up, start by our video.Inflate slightly, insert the valve, install the inner tube securely and make sure it is not pinched in the rim.
Fitting a tyre:
Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating a tyre:
Proper fitting starts at the valve and ends at the opposite end, without the need for a tyre lever to prevent punctures.
Pro advice:
Simple maintenance:adjust tyre pressure before each outing to avoid problems.
Find more information available with this link:
https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air
Weight:
104 g
COMPOSITION
composition
Main part: 100.0% Synthetic Rubber; Cover: 100.0% Polypropylene; Valve: 100.0% Brass
Tips for storage and maintenance
Storage tips
Carry your inner tubes in a container to protect them from getting punctured (B'Twin carry case, original packaging, etc.).
Restrictions on use
Take care not to pinch the inner tube when mounting it.
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years