Technical dimensions and weights
Inflated board:
Length: 14’ (426 cm)
Width: 31” (79 cm)
Thickness: 6” (15 cm)
Volume: 350 litres
Weight board only: 12 kg (+/- 5%)
BAG CONTAINING FOLDED SUP:
Height: 90 cm
Width: 46 cm
Thickness: 25 cm
Weight: 500 g
These dimensions leave plenty of room for the pump and paddle (not included)
NEW SHAPE & DOUBLE CHAMBER
New shape with tapered bow cuts through waves better and increases speed on the water, enhancing glide performance.
Its double-chamber design makes it suitable for longer distances, providing extra safety for paddling up to 2 nautical miles offshore.
How do you inflate and deflate a SUP?
INFLATION
This SUP is fitted with a new-generation valve for improved safety.
Open the cap, connect the pump in mode IN and inflate to 15 psi for optimal glide.
Disconnect the pump and close the outer cap.
DEFLATING
Turn the cap a quarter clockwise (“OUT” mode).
Roll the board, starting from the opposite end to the valve to push out all the air for easier folding.
Close the cap once deflation is complete.
What is the recommended user weight and maximum load of the board?
Designed for riders up to 140 kg, this board maintains its glide performance and stability. Ideal for riders under 140 kg or for day trips with more weight, it can be used solo, in tandem or with the family. It can carry one adult with their gear, one adult standing with one or two kids, or one adult standing accompanied by another adult sitting or kneeling. Maximum load for buoyancy: 350 kg.
Fin and fin base
Available online in the event of loss or breakage.
SUP fin reference: 8363793
Remember to remove the fin as soon as you leave the water and, if possible, rinse the base before and after each use.
When folding, start at the fin box, following the dotted lines to avoid any risk of damage.
How can I repair my stand up paddleboard?
We offer a stand-up paddleboard repair kit for repairing small, easily visible leaks.
For all other repairs, we recommend that you contact the workshop of your local shore.
We can repair bases of the fins, handles, valves and significant leaks.
WHAT KIND OF CONSTRUCTION?
Single-layer dropstitch construction with central stringer for greater rigidity and performance. Double-layer glued rails for added strength and durability.
What’s in the bag?
A 14’ SUP
A fin
A leash
A manual
A repair cloth (glue not included)
A spanner for the valve (to be used when the SUP is deflated)
Recommendations for use
We recommend:
Always wear a buoyancy aid vest or a buoyancy aid belt.
- Do not go more than 3 km from shelter.
- Do not use the leash on rivers.
- Notify someone of your trip and your whereabouts.
- Research to find out if there are any local navigation rules that apply to the location of your trip.
