TECHNICAL DIMENSIONS AND WEIGHTS
Inflated board:
Length: 10’6 (320 cm)
Width: 33” (84 cm)
Thickness: 6” (15 cm)
Volume: 290 litres
Weight board only: 8.4 kg (+/- 5%)
Weight board, leash, fin & backpack: 9.6 kg (+/- 5%)
Weight of the paddle included: 1.2 kg (+/- 5%)
Weight of the pump included: 1200 g (+/- 5%)
BAG CONTAINING FOLDED SUP:
Height: 92 cm
Width: 40 cm
Thickness: 30 cm
These dimensions leave space for the pump and paddle
WHAT’S IN THE PACK?
A 10’6 SUP
A take-apart adjustable paddle
An easy manual pump
A standard fin
A seat
A backpack
A leash
An instruction manual
A repair cloth (glue not included)
A valve spanner (to be used when the SUP is deflated)
WHAT IS THE RECOMMENDED USER WEIGHT AND MAXIMUM LOAD OF THE BOARD?
Designed for riders up to 130 kg without compromising paddling quality.
Recommended user weight:
Under 80 kg: very stable board
Over 80kg: the ideal board for getting started easily
The board can be used by more than one person:
- 1 standing adult + 1 or 2 kids (seated or kneeling)
- 1 standing adult + 1 adult (seated or kneeling)
Maximum buoyancy load to keep from sinking: < 290 kg
WHAT KIND OF CONSTRUCTION?
Single-layer Dropstitch knit construction without stringer, with double-layer glued rails for added strength and durability.
FIN AND FIN BASE
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8363793.
Remember to remove the fin once you leave the water.
Rinse the fin base before and after each use to keep it working properly.
Start folding up from the fin base, following the dotted lines to avoid any risk of damage.
VERSATILITY
Kayak mode: install the seat and use the paddle in kayak configuration to discover this sport.
SUP mode: stand and paddle with the paddle in SUP configuration, stowing the spare section under the bungee cords.
HOW CAN I REPAIR MY STAND UP PADDLEBOARD?
We offer a stand-up paddleboard repair kit (ref. 8512384) for easily fixing small, visible leaks.
For all other repairs, we recommend contacting your Decathlon store’s workshop.
Our teams can work on fin bases, handles and valves, as well as larger leaks.
HOW DO YOU INFLATE AND DEFLATE A SUP?
INFLATING:
Check the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 15 PSI.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
DEFLATION:
Firmly push the valve’s orange button to let the air out.
Do not put your face near, and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
HOW TO ATTACH YOUR SEAT TO YOUR SUP
For reasons of grip and comfort, we advise against placing the seat on the board handle.
Position the seat slightly back from the handle, feed the straps through the loops on the board and tighten them using the buckles on the seat.
Finally, adjust the backrest angle to your liking by tightening or loosening the straps.
