Directions for use
We recommend that you use the product with a buoyancy vest.
Warranty
Guaranteed availability of spare parts essential to use of product: 2 years
Availability: 10 years
How to deflate and store the kayak
Rinse and leave the kayak to dry.
Deflate the kayak by opening the 3 “Boston” valves.
Fold the lateral tubes down onto the floor.
Roll, starting from the opposite side to the valves to remove the air.
Place the rolled-up kayak into the main compartment of the bag.
Tighten using the compression strap.
Close the zip on the bag
Dimensions How heavy is it?
INFLATED SIZE:
Length: 382 cm
Width: 108 cm
FOLDED & BAGGED SIZE:
Height: 80 cm
Width: 43 cm
Thickness: 33 cm
Kayak weight: 17 kg
Maximum pressure: 0.1 bar (1.5 PSI)
Pack weight (kayak + 2 paddles + pump + bag + stabilisers): 21kg
Number of seats: 2 or 3 seats with a limit of 230 kg (507 lbs). 2x 4-part paddles
Pump: 1 manual pump
Pack contents kayak, 2 seats, 2 paddles, pump, bag, repair kit, skegs
How to inflate and position the floor of the kayak
Inflate the floor, then a side tube, then the second one to 50%. Check the positioning of the chambers. Then fully inflate it to a maximum pressure of 0.1 bar (1.5 psi). Ensure the valves are properly closed.
DO NOT OVER INFLATE! Do not leave the inflated kayak in direct sunlight
In case of EXTREME HEAT, deflate the kayak slightly out of the water to avoid excess pressure that could damage it.
Install the three skegs, unless using on a river with a low water level.
Is the kayak comfortable? What is the back support like?
Inflatable seat and low backrest for lumbar support.
Regulations Canoe Kayak over 3.50m
Your canoe/kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is approved for sea use by the manufacturer.
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You must carry a number of items of safety equipment.
What if the kayak is pierced?
In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber.
The floor can be uncovered by opening the rip-tab fastenings.
Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch.
Example 2: the hole is located along a seam; contact the DECATHLON workshop service to exchange the faulty bladder (two-year warranty).
