Construction
Top PE foam - 3 mm at 80 kg/m3 + 2 mm at 64 kg/m3
Core EPS foam 28 kg/m3, 3 ply stringer 12 mm thick
Bottom PE foam - 2 mm 33 kg/m3 + 2 mm 80 kg/m3 and 0.8 mm HDPE film
Using the leash
It is compulsory to use the leash at surf spots. Choose a short cord so that the rail saver of the leash rests against the rail. If the cord is too long, it could damage the rail.
CAUTION: never hold the board leash with your hands. They could get caught in the leash and sustain serious injury. Check the binding to the board at each session. Practice removing the leash from your ankle in the event of a problem.
We’ll fix your board!
Cuts, blisters under the foam? Our workshops can easily repair your foam surfboard.
Please enquire about repair conditions with our in-store teams.
Precautions for use
Be careful, as prolonged exposure to the sun or high temperatures can cause the coating to delaminate. We recommend storing your board in the shade and not inside a vehicle. Tighten the fin screws regularly using the tool supplied to minimise water entry.
If you need to strap the board to a roof rack: we recommend putting the board in a bag. The strap may damage the rail.
Dimensions
5’6” x 20” 5/8 x 2” 1/2
168 cm x 52 cm x 6 cm
35 L
3 kg
Rigging
1) ensure that the small side screws are unscrewed.
2) Clip the rear of the fin into the notch at the rear of the housing
3) Press to push the fin in horizontally.
4) Screw each screw to the fin. Be careful not to over-tighten as this could damage the fin.
For dismantling: Unscrew the screws using the spanner provided.
Suitability
A fun, leisure-oriented foam shortboard, ideal for waves from 50 cm to 1.2 m (hip to shoulder height). Its square tail will get you through the soft sections, while being as forgiving as possible when you get it wrong. This board will give you pleasure and fun whatever the conditions and whoever’s in the water.
