Type of buoyancy compensator
This BC has a wraparound bladder. The way the BC connects to the harness allows the inflatable bladder to expand outward. This special design avoids chest compression during dives.
Modular BCD design
The Rock Pro BCD has 6 stainless steel D-rings.
2 releasable weight pockets with visual confirmation of correct insertion.
Maximum load 6 kg/13 lbs (size M to XL or 4 kg for size S).
2 large zipped pockets with an elastic loop on the inside to attach accessory clips.
Benefits
The BCD is equipped with two overpressure and rapid exhaust dump valves, one on the right shoulder and one on the lower right, in addition to the inflator hose manual dump valve. All valves are "low profile" for minimum bulk and drag.
The Rock Pro comes with two tank attachment straps for more stable and secure positioning.
The low weight of this BCD makes it ideal as travel diving equipment!
Product composition
Material: Cordura®420.
Weight and buoyancy
3.2 kg in size S and 150 Newton
3.3 kg in size M and 160 Newton
3.4 kg in size L and 200 Newton
3.45 kg in size XL and 230 Newton
Routine care advice
1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder. 3/ Dry your buoyancy compensator on a wide hanger, out of the sun. Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.
Servicing buoyancy compensators
Your buoyancy compensator must be inspected and serviced by a certified Mares centre at least every two years, and more often if you are a frequent diver. After Sales Service: Please visit our website.
