Kids’ water shoes with rip-tab - Aquashoes 120 lagoon
Our team developed this new version of Aquashoes for kids, which are much easier to put on with the rip-tab on the top!
The rip-tab on the top of the foot enables kids to put on and take off their water shoes by themselves.
BENEFITS
Easy dressing
Rip-tab on the top of the foot makes them much easier to put on
Grip
5 mm studded soles to prevent slipping.
Fitting comfort
3 mm EVA detachable insole
TECHNICAL INFORMATIONS
Which uses are these Aquashoes designed for?
The Aquashoes 120 are designed for snorkelling and aquatic touring. They let you comfortably observe the seabed, regardless of whether there are pebbles, sand, rocks or stones underfoot.
They can also be suitable for other aquatic practices: kayaking, stand-up paddle boarding.
Can I walk on rocks with them?
Of course it is possible to walk on rocks with the Decathlon Aquashoes 120. However, be careful on the slippery rocks or rocks covered in seaweed where the grip may be reduced.
Can I wash my shoes in the washing machine?
Subea aquatic shoes can be put in a washing machine with detergent on a cycle of 30°C maximum. Choose a delicate programme.
Then you should let them dry in the open air, avoiding the sun.
What size Aquashoes should I choose?
As our Aquashoes are fitted, we advise you to choose your usual size. The best solution being to try them in store, but keep in mind that if the size doesn’t fit, you can exchange them!
COMPOSITION
composition
Outsole: 20.0% Polystyrene, 80.0% Styrene Butadiene Styrene; Upper of: 80.0% Polyester, 20.0% Polyester; Lining and sock of: 20.0% Polyester, 80.0% Ethylene Vinyl Acetate
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analyzing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled thermoplastic
Product made from 15% recycled thermoplastic
Using recycled thermoplastic rather than conventional thermoplastic reduces the CO2 emissions linked to the material by at least 11%.
-
MaterialRecycled polyester
Product made from 7% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 8% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled rubber
Product made from 1% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.
-
ProcessGreige (undyed)
Product made from 1% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of textiles by at least 53% compared to conventional dyeing.