Men's warm and waterproof ski and snowboard jacket, JKT 500 red and black
This versatile jacket will accompany you on all of your sessions in all weather conditions thanks to its synthetic fibre insulation, soft collar and ventilation
Together with the fibre, the taped seams and waterproof membrane (10,000 mm) keep you dry. The perfect jacket for keeping you warm and sheltered from moisture when skiing!
BENEFITS
Freedom of movement
This jacket has a fitted cut, without compromising on freedom of movement.
Warmth
Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.
Waterproof
15,000 mm waterproof fabric, sealed seams.
Breathability
Breathable fabric and ventilation strip on the back.
TECHNICAL INFORMATIONS
Practical and comprehensive accessories for all your outings.
- 2 hand pockets
- 1 inner chest pocket
- 1 inner mesh pocket
- 1 ski pass pocket
-1 mask cloth
- Automatic snow skirt
- Adjustable sleeve cuff
- Adjustable hood
Good waterproofing capacity (10,000 mm Schmerbers), tested in real conditions.
The waterproof component and the assembly prevent water getting in. The seams are waterproof, and the zips are also waterproof and under a protective flap. This jacket has been tested in a special shower that reproduces the conditions of the ski resorts, and in the field for several days in different weather conditions.
Water repellent jacket, like all Quechua jackets.
A fabric's water-repellent property is its ability to let water slide off its surface without soaking in. The fabric doesn’t soak up water and so remains lightweight, breathable and warm. It is made from a treatment on the outside of the fabric, which must be renewed (every 3 washes).
A jacket that provides just the right amount of warmth for a day on the slopes.
In addition to its filling, the jacket’s waterproof zips, snow skirt, collar and adjustable hood and sleeve cuffs offer better protection against the cold.
A breathable jacket to evacuate heat during periods of exertion.
The RET, or the evaporative resistance of the material (ISO 11092 Standard), is 11. The lower this rating, the more water vapour generated by the body evaporates.
RET < 9 = extremely breathable 9 < RET < 12 = very breathable
12 < RET < 20 = breathable
RET > 20 = little or no breathability.
The 500 JKT jacket is made from a lined fabric.
This is a very thin polyurethane film that makes the material waterproof while remaining breathable. More flexible, lightweight, resistant and often more breathable than coating, which is less expensive and requires a protective lining, similar to paint applied to the inside of the fabric.
This product is repairable.
Beyond the warranty period (2 years), your product will still be repairable (seams, zips, etc.). During the warranty period, we will carry out repairs free of charge. These solutions are available at your nearest store.
Weight.
Between 0.9 kg in size S and 1.15 kg in size 2XL. 1.02 kg in size L.
How should you dress under your ski jacket?
When skiing, we talk about the three-layer rule: A first thermal layer (ski base layer), a second layer (fleece or down jacket) and a third layer, your jacket. Adapt the second layer to suit the conditions, or take along a bag so you can take it off during the day.
How to restore the jacket's water-repellent properties?
The water-repellency of your jacket must be regularly reactivated (every three washes): over time, even if the jacket remains generally waterproof thanks to its material, it seems to start absorbing water. To do this, use a reactivating spray or a treatment reapplication product, and follow the tutorial in the customer service section of our website.
Wash and/or dry your ski/snowboard jacket: following a specific protocol, you can improve its lifespan.
Close the zips, loosen the ties and read the instructions on the label. Tumble dry on a synthetic cycle to put the fibres properly back into place. If you do not have a tumble dryer, see tutorials on our YouTube channel or customer service website.
COMPOSITION
composition
Padding: 100.0% Polyester; Main fabric: 100.0% Polyester; Lining: 100.0% Polyamide; Back lining: 10.0% Elastane, 90.0% Polyester; Inner fabric: 100.0% Polyester; Yoke: 100.0% Polyester; Sleeve lining: 100.0% Polyester; Collar: 100.0% Polyester; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric's water-resistance. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Quechua products are laboratory-tested, as well as tested in the real-life conditions for which they were designed: in the snow, in the cold, and in all possible conditions you may come across when skiing and snowboarding.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analyzing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyamide
Product made from 4% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 38%.
-
ProcessDope dyed
Product made from 29% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
Material
Recycled polyester
Product made from 40% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.