TOURING SKI - CRUISER 80 + TOUR LIGHT BINDINGS + SKINS
We designed this pack that is perfectly suited to skiers wanting to ski on marked routes in ski resorts and coming back down on the groomed slopes.
Get our beginner-friendly ski touring pack, perfect for skiers skiing on marked routes in resorts. Compatible with ski touring boots with inserts.
BENEFITS
Ease of use
Available in packs with bindings and skins (cut to the length of the skis)
Lightweight
Ski with a Tour light binding = 1700 g in 168 cm
Versatility
Ascending on marked routes and descending on or beside the groomed slopes
Stability
Average camber provides good stability at average speed on all types of snow.
Traction
The straight sidewalls spread the pressure along the full length of the ski
Ease of handling
Front and rear rocker for initiating turns more easily
TECHNICAL INFORMATIONS
Ski + bindings pack
The skis are sold as a pack with our Tour Light bindings and skins.
The binding is fitted to a rail for adjusting its length. It is therefore suitable for a wide range of foot sizes.
The baseplate is mounted according to an assembly plan for each size in order to suit everyone's needs.
This assembly enables you to lend your skis, change the size of boots, etc...
It is a huge advantage to easily discover cross country skiing.
Seal skins
The skins provided are trimmed and cut to the length and width of the ski.
They are made of 70% mohair and 30% synthetic materials – the ideal compromise in terms of gliding performance (when climbing in order to save energy) and grip (when climbing to avoid backsliding).
The skins are fitted with a metal loop to fit most ski tips and an adjustable camlock on the back to fit the skin to the back of the ski."
Structure
Sandwich wood (Palownia) construction with straight edges.
What is the rocker?
When placing a ski on the ground, its points of contact are found near the nose and tail, whereas the middle of the ski (under the bindings) is slightly raised (this is the camber). The longer and higher the camber, the greater the edge grip and more responsive the ski. The lower the camber, the more forgiving the ski and the better the handling.
WHAT IS A ROCKER?
On a "rocker" ski, the tip – and, sometimes, the tail – comes off the ground much sooner than with a cambered ski without a rocker. This moves the points of contact towards the centre of the ski. The surface of the ski in contact with the snow is shortened: they have better handling and more buoyancy on soft snow. When leaning into turns, the edge length offers more grip on hard snow. The longer the rocker, the better the handling of the ski.
Rocker
The Cruiser has a front rocker and a rear rocker (tip and tail), which allows it to be manoeuvrable and very easy to pivot on all types of snow.
on piste, this small rocker makes it possible to turn the ski very easily without any effort.
What are ski sidecuts?
The sidecut is characterised by 3 dimensions: the width at the tip (front of the ski), at the waist (middle of the ski) and at the tail (rear of the ski).
- The wider the tip, the easier the turn entry.
- The narrower the waist, the stronger the grip in hard snow. The wider the waist, the more comfortable and stable in different snow conditions.
- The wider the tail, the more stable the ski is in turns. The narrower the tail, the better the glide.
Sidecuts
Sidecuts: 116/80/102
Radius 18 m in 168 cm
Weight
Ski only = 1410 grams in size 168.
Ski with Tyrolia Ambition 10 binding = 2400 grams in size 168 cm.
BINDINGS
TOUR LIGHT Din 4-10- 52 mm adjustment
Adjustable from 250 to 302mm (152cm ski)
Adjustable from 260 to 312mm (160cm ski)
Adjustable from 270 to 322mm (168cm ski)
Adjustable from 290 to 342mm (176cm ski)
COMPOSITION
composition
Board for surf: 2.0% Polyurethane, 9.0% Steel, 6.0% Thermoplastic Polyurethane, 15.0% Acrylonitrile Butadiene Styrene, 11.0% Polyethylene, 27.0% Glass Fiber, 17.0% Wood, 3.0% Aluminium, 10.0% Epoxy Resin
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry the skins after each outing. To prevent rust from forming on the ski edges, dry the edges and base after use, before storage.
TESTS AND WARRANTY
Warranty
2 Years