Women’s warm and breathable ski and snowboard jacket, FR500 - Pale Pink
Store Availability
A freeride ski jacket that is both warm and lightweight? A big thank you to the inner padding, which protects you from the cold without constricting you.
Freeride with comfort in this waterproof, breathable jacket. For optimal comfort, use the integrated heat pads and ventilation features to control your temperature and tackle biting winds.
BENEFITS
Anatomic design
3D hood adjustment that can be put over the helmet and follows your movements
Freedom of movement
Loose fit and stretch component that follow all your movements
Warmth
Glued heat pads (100g/sqm wadding) protect you moderately where needed
Waterproof
15,000mm (Schmerbers) membrane and taped seams. Waterproof zip
Pockets
5 secure pkts: 2 hand, 1 chest, 1 inner, 1 ski pass, 1 mesh pocket
Breathability
The membrane, placed heat pads and ventilation help wick away perspiration
Limits snow entering
Helmet hood, storm cuffs and a snow skirt to face the winter
Airing
Two large vents under the arms to lower the temperature after your runs
TECHNICAL INFORMATIONS
Warmth and breathability technology
Positioned warm pads provide good thermal protection for your Freeride skiing days.
This technology reserves a large area where the 3-layer membrane component can eliminate your perspiration more effectively.
A perfect compromise between a fully padded jacket and a 3-layer jacket without providing any additional heat.
Modularity is the key feature of this jacket so it’s important to add a warmer or cooler second layer depending on the conditions.
Additional features
Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a single tightening toggle located behind the head.
Tightening on the wrist and cuffs with thumb loops to prevent air and snow from getting in.
Snow skirt that also reduces draughts and prevents snow from getting inside.
Ventilation
To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration.
The vents play an important role in wicking away perspiration.
This is why we have equipped this jacket with 2 ventilation zips, two large zips under the arms (30cm in size L).
Cut
The wide fit and pre-shaped sleeves are there to free up your movements so you can ski in complete freedom.
We designed this jacket with a component that has mechanical stretch. You’ll be free in your movements while remaining feminine!
Pockets
2 hand pockets with a waterproof zip.
1 inside chest pocket with watertight zip.
1 outer chest pocket with watertight zip.
1 pocket with a zip and flap on the left sleeve for the ski pass.
1 quick access inner mesh pocket.
What should you wear under your skiing jacket?
To keep warm and dry, use the 3-breathable-layers rule: A ski base layer and a second layer liner jacket to retain warmth, a third layer ski jacket to protect you from bad weather.
The base layer keeps you dry by wicking away the perspiration from the skin to the other layers.
The second layer provides warmth, as with down jackets or fleece sweaters.
The third layer
Protection from the outdoor elements (snow, rain and wind) by preventing them from entering (while still allowing perspiration to escape so that you do not feel "wet inside"). It should therefore ideally be waterproof AND breathable. The third layer can also provide insulation in the case of lined trousers or jackets and thus complement the action of the second layer.
Water repellency
Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.
Component's waterproof properties.
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a fabric with a waterproof rating of 10,000mm is therefore resistant to the pressure exerted by a 10,000mm column of water
Breathability of a component.
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability.
For example: RET < 9 = extremely breathable fabric
9 < RET < 12 = very breathable fabric
12 < RET < 20 = breathable fabric
RET > 20 = little or no breathability.
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.
How do we make a garment waterproof?
The waterproof properties of the garment are related to its component, seam sealing and assembly design.
We then carry out shower tests on our garments.
Waterproofness/Shower test
This garment has been validated in a shower test under 100L of water/sqm/hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
Your product is repairable
This product is repairable.
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.
What is the RECCO® system?
All our Freeride jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
WEIGHT
0.71kg in size M
To help you choose the right size
The model in the photo is wearing a size M and measures 175cm.
Measurements:
Chest measurement: 92cm
Waist measurement: 66cm
Hip measurement: 89cm
COMPOSITION
composition
Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Main lining: 100.0% Polyester; Secondary lining: 100.0% Polyamide; Pocket: 24.0% Elastane, 76.0% Polyamide; Coating: 100.0% Polyurethane; Cuff: 15.0% Elastane, 85.0% Polyamide
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
Restrictions on use
A second layer is essential for good thermal comfort.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Warranty
2 Years
Agree by
A team of customers, Decathlon staff and ambassadors, all Freeriders, have tested and validated the characteristics of this jacket.