TRIBORD
Dinghy 500 Men's Sailing GBS 3/2 mm Neoprene Wetsuit - Black/Orange
Our Tribord designers—and fellow sailors—designed this neoprene wetsuit for regular dinghy/catamaran sailing in cool and cold weather
Neoprene wetsuit to keep you warm in a dinghy thanks to its thickness and efficient seams! It makes movements easier with its cut and elasticity. Resistant to friction against the boat
ID 8383864
BENEFITS
Easy dressing
Zip at the back with a pull tab to make it easier to open and close.
Freedom of movement
Cut suitable for the trapeze position Separate pieces on the arms and torso.
Robustness
Wear-resistant anti-abrasive reinforcements on seat, backs of thighs and knees.
Warmth
3/2 mm neoprene. Glued and blind-stitched seams to help keep water out.
User comfort
A comfortable wetsuit with reinforced knees (7 mm).
TECHNICAL INFORMATIONS
The concept of thermal insulation using neoprene:
By trapping a thin layer of water around the body, a neoprene wetsuit works in two ways:
1. the water trapped inside the wetsuit gradually warms up
2. heat transfer from the body decreases.
The wetsuit and the thin covering of water form a layer of insulation.
Neoprene is a closed-cell elastomeric foam with trapped nitrogen bubbles that have insulating properties.
The technical GBS design of the DG500 dinghy/catamaran neoprene wetsuit is intended for cool and cold weather:
The Tribord DG500 neoprene wetsuit is made of 100% neoprene (thickness: 3 mm) to ensure optimal thermal insulation.
All seams are sewn together with strong thread suited to this particular type of fabric and are glued to prevent water getting through the seams (GBS).
A strip of neoprene is sewn under the zip to reduce the cooling effects of any water that gets through it.
In the event of moderate to strong winds and cold weather, also wear the Tribord S500 sailing smock
Freedom of movement of the DG500 dinghy/catamaran neoprene wetsuit:
The Tribord DG500 dinghy/catamaran neoprene wetsuit has a cut and materials designed to make sailing manoeuvres and changing positions much easier.
The arms and chest piece consist of a different piece of fabric to make manoeuvres and movements much easier.
The legs, buttocks and knees are also separate pieces to make sitting, crouching and changing sides in the boat much easier.
All the seams are stretch seams.
Neoprene reinforcements on the DG500 wetsuit on the knees, buttocks and thighs:
It is reinforced on and below the knees and on the seat and thighs. Thickness is 7mm on the knees for added comfort.
The additional fabric works in two ways:
- to reduce the wear and tear of the neoprene in areas smost exposed to rubbing and chafing from the boat (deck fittings, rubbing strake, carpet, etc., depending on the supports)
- to reduce the inconvenience of this rubbing and chafing on the knees, buttocks and thighs for the user, who is wearing the suit and is active on the boat
Construction of the neck of the DG500 dinghy/catamaran neoprene wetsuit:
The neck finish and height have been developed to limit the sensation of discomfort from the neoprene and irritation on even the most sensitive skin.
However, not everyone's skin reacts in the same way: in this case, we recommend that you wear a top under the wetsuit to reduce sensitive rubbing and chafing.
Repair
Thanks to the neoprene adhesive (see link), you can repair your wetsuit by following the steps shown in the video (see link).
COMPOSITION
composition
Foam: 100.0% Rubber; Lining: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Once dry, store on a hanger away from direct sunlight.<br /> Rinse with fresh water to remove salt that could deteriorate the neoprene and the zips.<br /> Avoid direct heat sources. <br /> Hand wash recommended.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. Tested by the 47°Nautik sailing school (Gulf of Morbihan, Brittany - France) during.
Warranty
2 Years