Skip to main content
⏰ Free same-day pick-up from stores

DECATHLON

Men’s diving jacket with hood 5.5 mm neoprene SCD black and blue

4.6 out of 5 stars from 16 reviews
16 reviews

A jacket designed by our teams to slip on easily and be worn on top of an overall. Ideal during your dives in temperate waters (16°C -24°C)

Above all easy to put on and take off. This diving two-piece wetsuit allows you to choose a top and a bottom of different sizes that are better adapted to your stature.

ID 8330584

€74.99
Tax included
Color: Black / Blue

  • Pick up at Decathlon

    Loading...

  • Pickup with BOX NOW

    Loading...

  • Home Delivery

    Loading...

Design benefits

  • easy dressing

    This two-piece wetsuit is easy to put on and take off.

  • thermal insulation

    5 mm neoprene jacket. Taped seams with a GBS glued and blind stitched assembly.

  • freedom of movement

    Anatomic cut for free arm movement, no seams under the armpits.

  • modularity

    You can mix and match overalls and jacket sizes.

  • Features

    Design details

    Details of thermal insulation

    5.5 mm neoprene wetsuit jacket with front zip.
    5mm neoprene foam, covered with nylon fabric on both sides. Seams taped using a GBS (glued and blind stitched) assembly.
    With this 2-piece wetsuit, you can choose a sleeveless overalls and jacket of different sizes.
    Weight of the wetsuit (size L): 1.580 kg.

    GBS (glued and blind stitched) assembly

    The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued and then stitched for extra robustness (the needle does not go all the way through the neoprene to stop water getting through).

    Ease of movement / Putting on and taking off the diving suit

    One-piece diving suit with an attached hood equipped with the Air Expulse system: a system to evacuate air bubbles trapped in the hood.
    The crotch strap is fixed and the wetsuit easy to put on with the diagonal zip on the front.
    No underarm seams for easier arm movements.

    Thermal performance class

    This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate its compliance with the current standard (EN 14225-1:2005).

    CLASS C certified diving suit:
    A (+7 °C/+12 °C / +45 °F/+54 °F)
    B (+10 °C/+18 °C / +50 °F/+64 °F)
    C (+16 °C/+24 °C / +61 °F/+75 °F)
    D (+22 °C/+30 °C / +72 °F/+86 °F).

    What is a diving suit?

    This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.
    Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm.
    Thanks to their suppleness and modularity, they constitute excellent diving suits.

    Tips on how to get into a diving suit

    Put your foot in a plastic bag, then slip your leg into your diving suit. Your entire foot comes out without snagging!
    To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

    Tips on how to take care of your diving suit

    1) Soak the inside and the outside of the diving suit in clean water after each session.
    2) Clean with a bactericide solution.
    3) Rinse thoroughly in clean water.
    4) Dry on a wide hanger in a dark and well-ventilated place.
    Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
    Zips can be cleaned with a toothbrush and lubricated with silicone grease

  • Usage & care

    Instructions

    Download here

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Lay your diving wetsuit out away from sunlight and away from a heat source on a wide hanger, to keep its shape and to preserve its neoprene.

    Usage precautions

    Designed to be worn with a sleeveless overalls.

    Cleaning

    • HAND WASH. MAXIMUM TEMPERATURE OF 40°C.

    • DO NOT DRY CLEAN.

    • DO NOT IRON.

    • DO NOT TUMBLE DRY.

    • BLEACHING EXCLUDED.

  • Specifications

    Composition

    Foam: 100.0% Rubber;Lining: 100.0% Polyamide

  • Testing

    Test product

    Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.

    Agree by

    Our technical partner: Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analyzing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Long lasting

    Repairability

    Product designed to be repairable on more than 80% of breakages and failures.

    Read more

    Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.