How to fit your new tubeless ready tyre
Check that your rim tape is tubeless compatible.First install the tubeless valve (Ref.8817242). Attach one side of the tyre, then the other, starting with the valve.Inflate the tyre until you hear a ‘click’ confirming that it is correctly positioned.To inject the sealant, deflate the tyre, remove the valve core and use the tubeless liquid (Ref.8814747). Put the valve back in place, re-inflate the tyre and spin the wheel so that the liquid spreads throughout the tyre.
How to inflate your tyre correctly
Before inflating, check that the tyre is properly seated on the rim.Then look at the indications on the sidewall of the tyre.Adjust the pressure according to these values to ensure the tyre inflates properly.
Performance properties
Diameter: 26
Width: 2
Tyre bead: flexible
Mount: Tube Type (inner tube)
Rubber: single rubber
Puncture protection: on the sidewalls
Carcass: 60 TPI
ETRTO: 57-584
Weight: 810 g
How to check the wear on your mountain bike tyre
It's time to change your tyre if the tread is smooth or if the underlayer is visible.These are the main signs of wear.Don't hesitate to replace it for your safety.
How to remove your tyre
To remove a damaged tyre, remove the wheel from your bicycle and then completely deflate the inner tube.Next, push the sides of the tyre inwards to detach it from the rim.At this stage, you will need DECATHLON tyre levers (ref.8930710). Use them as levers to pull the tyre over the rim.If necessary, attach a tyre lever to a spoke to keep the opening open, then repeat the operation until one entire side of the tyre is free.
