Suitability
A typical mid-length foam board for leisure and fun, ideal for waves from 50cm to 2m (hip to head height). Its rounded pin tail will get you through soft sections, making beautiful curves, while being as forgiving as possible when you get it wrong. If you’re a beginner, this board will help you progress. If you’re an intermediate user, this board will give you pleasure and fun whatever the conditions and whoever’s in the water.
Dimensions
7’ X 22” 3/4 X 3”
213 cm X 58 cm X 8cm
volume 50 L
4.8 kg
Construction
Innovative soft construction.
“In-mould” lamination of the foam for a more precise shape.
Top PE foam 2mm 96kg/m3 and 33kg/m3 with HDPE film - 0.2mm
Core EPS epoxy, 3 stringer plywood 12mm thick
Bottom PE foam 2mm - 48 kg/m3 and HDPE film - 0.5 mm
Rigging
1) ensure that the small side screws are unscrewed.
2) Clip the rear of the fin into the notch at the rear of the housing
3) Press to push the fin in horizontally.
4) Screw each screw to the fin. Be careful not to over-tighten as this could damage the fin.
For dismantling: Unscrew the screws using the spanner provided.
Precautions for use
Be careful, as prolonged exposure to the sun or high temperatures can cause the coating to delaminate. We recommend storing your board in the shade and not inside a vehicle. Tighten the fin screws regularly using the tool supplied to minimise water entry.
If you need to strap the board to a roof rack: we recommend putting the board in a bag. The strap may damage the rail.
We’ll fix your board!
Cuts, blisters under the foam? Our workshops can easily repair your foam surfboard.
Please enquire about repair conditions with our in-store teams.
