Skip to main content
⏰ Free pick-up from stores in 1 hour

SIMOND

CLIMBING AND MOUNTAINEERING HALF ROPE - ABSEIL ALPINISM 8.1 MM X 60M BLUE

Simond is now offering you a new abseil rope with a diameter of 8.1 mm for versatile use in mountaineering and on big, rocky trails.

Reworked to offer a better fluidity:resistance ratio, the ALPINISM 8.1 rope has a water-repellent DRY treatment (core and sheath) for use in snow and ice.

ID 8796710

€114.99
Tax included
Color: Colorless

  • Pick up at Decathlon

    Loading...

  • Pickup with BOX NOW

    Loading...

  • Home Delivery

    Loading...

  • Features

    Design benefits

    • Stretch

      Good fall absorption thanks to a low-impact force of 5.5 kN.

    • Lightweight

      Its weight of 41 g/m guarantees you a genuine comfort of use.

    • Versatility

      Meets with 2 standards: Double and twin rope.

    • Ergonomic grip

      8.1 mm diameter for a better balance of lightness and durability.

    • Water resistance

      The rope was treated with a water-repellent DRY core and sheath (UIAA DRY label)

    Design details

    Made in France

    All of our ropes are designed and tested in Chamonix, in the Mont Blanc valley.
    They are made in northern France by our manufacturing partner, Cousin, expert rope makers with 170 years of experience.

    UIAA Dry treatment

    This rope has the UIAA Water Repellent label
    A brief summary of test:
    - A rope sample is subjected to light abrasion over its entire surface, the equivalent to a few days’ use.
    - It is soaked for 15 minutes.
    - the amount of absorbed water must not be greater than 5% of the sample’s weight.
    The SIMOND DRY ropes easily meet UIAA requirements

    The rope's mechanical features are last longer in cold and wet conditions.

    Ultrasound seal

    Deterioration of rope ends is no longer an issue thanks to this new ultrasound fusion process.

    Middle marking

    To improve your safety, this rope features a black mark which indicates the middle of the rope.

    Weight

    41 g/m

    PLEASE NOTE: Weight measurements made according to the EN 892 standard.
    For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
    This gives you the real weight of the rope, which is often superior to the weight given by the standard.
    The weight measurement according to the standard is used to compare two ropes to each other.

    Technical features

    NUMBER OF FALLS: 5 / 13
    IMPACT FORCE: 5.5 / 8.7 KN
    DYNAMIC ELONGATION: 32.4% / 27.9%
    STATIC ELONGATION: 11.6% / 7.6%
    SHEATH SLIPPAGE: 0

    Stds/Certif.

    EN 892:+A2: 2021.

    Checking your rope

    It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!

    Warranty

    2 years

  • Usage & care

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car in the height of summer.

    Cleaning

    • MAXIMUM WASHING TEMPERATURE OF 50°C. NORMAL TREATMENT.

    • MAXIMUM WASH TEMPERATURE 60°C. MODERATE TREATMENT.

    • ANY BLEACHING AGENT ALLOWED.

    • DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.

    • PROFESSIONAL DRY CLEANING WITH TETRACHLOROETHYLENE AND ALL SOLVENTS LISTED OPPOSITE THE F SYMBOL. NORMAL TREATMENT.

  • Specifications

    Composition

    Main fabric: 100.0% Polyamide

  • Testing

    Test product

    Designed by our teams in the Chamonix valley, at the foot of the Mont Blanc, all our ropes are lab tested, certified to guarantee their mechanical features. Our technical partners test them in the field to validate product claims.

    Agree by

    Team SIMOND mountaineers, climbers and mountain guides

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analyzing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach

    Designed to reduce environmental impact

    Product made with a CO2eq reduction of 26% compared to the previous or similar product

    Read more

    Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.