| How to use a bike puncture repair spray |
1. Remove the object that caused the puncture
2. Vigorously shake the can
3. Position the valve at 10 o'clock or 2 o'clock
4. Firmly screw the appropriate end to your inner tube's valve
5. Remove the safety top on the cap
6. With the spray held vertically (nozzle up), spray all contents in a single go
7. Rotate the wheel to make sure the product distributes evenly
8. Ride for a few miles and then reinflate your tyre to the right pressure |
| The professional's advice |
You should replace the repaired inner tube after your ride.
When used to prevent punctures, this product is effective for up to three months. |
| Optimum period of use: |
The formula of this puncture repair spray is effective for 2 years from the date of production (see marking on the product), provided the product is stored in the recommended conditions. |
| Directions for use: |
Extremely flammable aerosol. Pressurised container: may burst if exposed to heat.Keep out of reach of children.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto a naked flame or other ignition source. Do not perforate or burn, even when empty. Protect from sunlight. Do not expose to temperatures above 50°C/ 122°F. |
