How to use a repair patch on an inner tube |
1/ Locate the hole on the inner tube.
2/ Rub the surface where the patch will be applied using the sandpaper.
3/ Degrease, clean and dry the surface.
4/ Spread the glue evenly around the hole.
5/ Wait around 1 minute until the glue turns dull.
6/ Place the patch over the centre of the hole (without touching the glue and grippy surface the patch with your fingers) and press hard for at least 1 minute.
7/ Remove the patch's transparent film. |
The professional's advice |
Check that no objects are lodged in the tyre before putting the inner tube back in place.For greater effectiveness, adapt the size and shape of the patch to the puncture. |
Product details: |
8 round patches (15 cm diameter)
1 piece of sandpaper
The rubber cement tube needed to apply these patches and repair your punctures (ref: 8545180) is sold separately. |
Storage: |
Patches:
Optimal lifespan:5 years at room temperature (16-22°C, 30-70% humidity), out of direct sunlight, in its packaging.
Minimum temperature for repairs: +10°C
Temperature for use: -40°C to +65°C |