Men’s Waterproof Hiking Jacket NH500 Imper
Our hiking designers have designed this NH500 waterproof jacket for regular hiking on lowlands, in the forest or on the coast in rainy weather.
Preparation is something we take seriously. This waterproof jacket's been tested against a 5m barrage of rain. With 4 sealed pockets and a breathable lining, it'll keep you trekking in all weathers.
BENEFITS
Anatomic design
Zip along the entire length so you can put it on easily Available in S to 4XL
Lightweight
Weight: 480g in size L
Waterproof
Waterproof coating 5000mm H2O (Schmerbers) | 100% taped seams
Pockets
4 sealed pockets: 2 zipped hand, 1 watertight chest, 1 inner Velcro
Breathability
Hydrophilic coating RET=12: reduces condensation | Mesh lining
TECHNICAL INFORMATIONS
Water resistance of the fabric
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
Fabric water-repellency
The fabric of this jacket is water-repellent, i.e. water runs off its surface without being absorbed. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. In addition, we taped the main seams that are most exposed to the rain.
Fabric breathability
Our product's fabric is extremely breathable - 12 TER
The breathability of a component is measured by its "Thermal Evaporative Resistance". This is its capacity to let out water vapour produced by the body during activity. The lower the Thermal Evaporative Resistance (TER), the higher the breathability of the fabric.
TER < 9 = extremely breathable fabric
RET <12 = very breathable fabric
RET < 20 = breathable fabric
RET > 20 = slightly to not at all breathable fabric.
How do you maintain the waterproofing quality of your jacket over time?
To maintain a durable water-repellent fabric, we recommend reactivating it regularly.
Do this every three washes (it is important to rinse abundantly) or after a dozen uses in the rain.
You can easily reactivate the water repellent property by warming the fabric:
- in a tumble dryer for 15 minutes (synthetic programme) - with a hair dryer at a distance of 20 cm by going back and forth twice
- or two strokes with an iron on the delicate setting without the steam function
Choose your waterproof jacket according to your sports effort
During sports activity, the extent to which we perspire depends on the intensity/duration of the physical effort.If the breathability of the fabric is not adapted to your type of physical activity, the perspiration vapour condenses inside the jacket.You will feel damp inside:It is not rain coming through but perspiration vapour condensing.Choose your jacket according to your type of physical activity.This jacket is designed for the occasional one-day hike at a speed of 5 km/h
Recommended additional product
To protect the lower body as well and have a very effective outfit to protect you against the wind and showers, we recommend the men's NH500 over-trousers.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend that you always dry this jacket thoroughly before storage.
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for co-designing high-quality products for your hikes and giving you access to all our expertise.
Warranty
2 Years
Agree by
This jacket has been tested and approved by a group of testers in the Rhône-Alpes-Auvergne region during field tests conducted in 2020 and 2021. In order to meet your requirements, Quechua products are tested in the wild in the conditions you encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analyzing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 26% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 58% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.