Απόκρυψη φίλτρων
Filters 0
Ταξινόμηση ανά:
Filters 0
Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
Σετ δύο σαμπρέλες 26 ιντσών

DECATHLON ASSURANCE SPORTS

3314575

Σετ δύο σαμπρέλες 26 ιντσών

3,90 €
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
  • Σετ δύο σαμπρέλες 26 ιντσών
Σετ δύο σαμπρέλες 26 ιντσών
Δεν διατίθεται διαδικτυακά

Διαθεσιμότητα στο Κατάστημα

This twin pack of inner tubes is compatible with 26" diameter tires, with a cross-section ranging from 1.70 to 2.20 with a 35 mm Schrader valve.

Δύο σαμπρέλες 26" με εξαιρετική σχέση ποιότητας-τιμής. Ταχύτερη και αποτελεσματικότερη λύση από την τοποθέτηση μπαλώματος.

Κατασκευή: 100.0% Καουτσούκ ισοβουτυλενίου βουτυλικού ισοπρενίου

ΠΛΕΟΝΕΚΤΗΜΑΤΑ

Συμβατότητα

26-inch tires and wheels for mountain bikes and hybrid bikes.

Αδιάβροχο

High quality valve that retains pressure.

ΣΥΝΘΕΣΗ / ΣΥΜΒΟΥΛΕΣ

How to choose an inner tube

Check the information indicated on the sidewall of the tire (diameter and width). For example, 26 x 2.20 means your tire is 26 inches in diameter and 2.20 inches wide.
On the tire sidewall, you will also find the dimensions in mm in ETRTO international units. For example, 50-559 means a tire that is 50 mm wide and has an inner diameter of 559 mm (approx. 26 x 2.00).

Removing an inner tube

Remove the used inner tube using B'Twin tire levers (item code 8047839).

Checks to carry out before installing an inner tube

Check the condition of your tire and replace it if necessary.
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.

Mounting the inner tube

Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tire

Start by mounting the tire onto the wheel on the opposite side to the valve.
Finish mounting the tire at the valve to avoid pinching the inner tube.
Never mount your tire with a screwdriver or a tire lever, as you risk pinching and puncturing the inner tube.

Inflating the tire

Inflate your tire carefully, to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Tip from the pros

To avoid punctures from pinching, and for best tire performance, we recommend that you check your tires and inflate them to the suggested pressure before every ride.

Weight:

7.1 oz