High-pressure Bravo valve for inflatable vessels
The Bravo high-pressure valve for your Itiwit, Tamahoo and Tribord high-pressure inflatable craft. It is screwed in using a 6-tooth spanner.
This valve lets you replace the non-return valve on your inflatable.
NEVER UNSCREW THE VALVE WHILE THE CRAFT IS INFLATED.
BENEFITS
Easy assembly / dismantling
The valve is easy to unscrew using the tool supplied with your craft.
TECHNICAL INFORMATIONS
Compatibility
This valve is compatible with Itiwit, Tribord and Tamahoo inflatables (see product photos)
Repair
The Workshop technicians in your local Decathlon store are available to help you change any parts on your equipment. Don't hesitate to ask them for assistance!
Always deflate your high-pressure inflatable before unscrewing the faulty valve
Screw in fully without over-tightening, re-inflate your craft and check that there are no air leaks. If you can hear a hissing sound, tighten it a little more.
PLEASE NOTE: never position your head over the valve while the craft is inflated.
Precaution when installing the valve
NEVER CUT any Dropstitch threads which may surpass the valve when you screw it back on, and instead put them back into the paddle.
Only change the male part. If the issue comes from the female part, contact your store's workshop.
DO NOT SCREW THE VALVE ON TOO TIGHTLY 5&(NM MAX° TO AVOID DAMAGING THE THREAD
COMPOSITION
composition
Metallic structure: 100.0% Polyoxymethylene
Tips for storage and maintenance
Storage tips
Thoroughly rinse the craft in fresh water to prevent mould. Store it deflated and flat, out of sunlight, after first removing the fins.
Restrictions on use
Ensure the valve is properly tightened to avoid leaks!
TESTS AND WARRANTY
Warranty
2 Years