FORCLAZ Ref. 8807205 4881052

1 Hiking Pole - MT100 Ergonomic Green

Tax included
  • 8807205
Not available online

Store Availability

Our designers created this pole with an innovative grip system for optimal safety and comfort during your hikes.


Compact design

3 telescopic sections. Collapsed length: 58 cm. Collapsed width: ~ 12 x 5 cm.


Summer washer and tip provided.Accessories, A-S parts available separately.

Ergonomic grip

From above (walking stick style). Pole aligned with arm, without bending wrist


Very simple and reliable push-pin system (push button). 90/95/100/105/110 cm


Aluminium 6061-T6. Large tube diameter 20/18/16 mm. Tungsten tip


240 g / pole


How it was designed...

Fully designed and validated by our team.

This model uses the chassis of the A200. It retains the push-pin adjustment system and over-sized tubes.

Why do we offer this grip that is held from above? We have noticed that the standard grip does not suit everyone, particularly for long periods. We therefore designed this pole slightly differently so that you do not have to bend your wrist and can spread the force more evenly in the arm as it is aligned with the pole.

How to adjust your poles to the correct length?

the arm along the body must be almost straight or slightly bent. It is therefore shorter than a conventional pole.

To do this: - pull the lower part until the push-pin locks (lower metal button)

- slide the middle tube until the upper button reaches the desired hole

- use the lines printed on the tubes to align the push-pin with the holes

Never go over the STOP line to avoid breaking the pole

Directions for use

This hiking pole is designed to help you balance, propel yourself and distribute effort between arms and legs.

To be on the safe side, check before you set off and at regular intervals that your baton is locked in place by simulating heavy bumps. Do not put on your backpack in case of a storm.Some users are sensitive to the whistling noise that can occur when the wind sweeps through the adjustment holes.

Care tips

Maintaining your poles properly enable you to maintain optimal function and increases their lifespan.

After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with water or without, with a soft brush or paintbrush.

Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.

Why is the pole sold individually?

At Decathlon, we have decided to sell our hiking/trekking poles individually. First because of how they are used. Indeed, some people only want to use one pole. Also, if one of your poles breaks, this means you only have to buy one and not a complete pair.

Accessories sold separately and adapted to this model

The advantage of buying Forclaz trekking poles is that you have a wide choice of compatible accessories and spare parts. So you can enjoy it for as long as possible.

Hiking pole caps: ref. 8580865

Summer baskets: ref. 8737774

Winter baskets: ref. 8503857

Replacement tip: ref. 8577675 or 8755646 (if new screwable version)



Axis: 100.0% Aluminium; Handle: 90.0% Polypropylene, 10.0% Styrene Ethylene Butadiene Styrene

Tips for storage and maintenance

Storage tips

Store the baton in a dry place without tightening the adjusting systems, so that they are not strained and retain their clamping power.


Test product

To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During its development, each model undergoes laboratory tests that reproduce these stresses (compression, three-point bending, etc.) until it breaks. We also tests parts separately (tightening power, tearing, etc). Finally, these tests are regularly repeated in production to ensure a constant level of quality.


2 Years

Agree by

As well as these laboratory tests, Théo, our test engineer, makes sure that each model also undergoes trials on standardised test terrains. It lets us check aspects such as comfort, ease of adjustment, vibrations, etc. Finally, we also check durability with a durability test mission that can reach over 500 km.