What does this kit contain?
The kit includes:
- the backpack
- the kayak
- the seat
- a backrest
- the foot bar
- a rudder kit
- a repair cloth
- instructions for use.
It does not include a skirt. The kayak is compatible with the spray deck code: 8801423.
It does not contain the trolley with which it is compatible, if you want to transform your bag into a trolley rather than carrying it: 8841214
Dimensions How heavy is it?
When the kayak is inflated:
- length: 500 cm
- width: 60 cm
When stored in its bag:
- height: 80 to 95 cm depending on the folding (height-adjustable bag)
- width: 50 cm
- thickness: 42 cm
- total weight: 23 kg (21.5 kg kayak + 1.5 kg bag) +/- 5%
Volumes of the two storage compartments: 300 L available
Recommended load:
- Rear: 1 x 40L bag + 20L bag (with space left over for 5L or 10L bags or a pump)
- Front: 1 20 L/2x10 L bag
- 150 kg max recommended
Innovative technology
The dream of compact kayaks that perform as well as rigid kayaks is coming true with the Kayak X900.
- Our patented V-shaped hull construction and the adventurous dimensions give it an incredible glide.
- The dropstitch hull and flexible decks mean that the 5m boat can fit into a rucksack.
- The use of watertight ZIPs makes loading and unloading easier than with conventional rigid kayak hatches.
The manoeuvrability and comfort of a 5-metre kayak.
We felt it was important to upgrade the 500 range so that you can kayak for longer distances.
You will no longer have to worry about positioning, as the seat has been improved to facilitate reclining, and the backrest also acts as a hip support. Finally, knee supports have been added to the X900Si kayak
If leaning is not enough, the foot bar is connected to a rudder, making it easier to change direction or stay on course in strong winds.
How to inflate and mount the kayak?
1. Inflate the main chamber (bottom), then the middle chambers. All the volumes are inflated to 10 PSI max (0.7 bar).
2. You can insert the foot bar onto the soft guides, push it to the setting that will satisfy you, adjust to your leg length with the buckle.
3. Position the seat by inserting it into the soft guides until it stops.
4. Insert the rudder and stretch the cables to the foot bar. Then tie knots at the foot bar pedals.
How to disassemble and deflate the kayak?
1. Make sure that the folding surface and the kayak (inside/outside) are clean
2. Remove the seat
3. Remove the footrests
4. Remove the rudder.
5. Deflate the kayak by removing the plugs and pressing on the valves (leave the valves in the open position so that the air can escape)
How to fold up the kayak to put it in the bag?
1. We recommend placing the canvas of the bridge inside the fold.
2. Fold the walls into the centre of the kayak, and leave the floor flat.
3. Starting at the bow, follow the instructions in the manual.
4. Leave the valve in the open position for air to escape.
5. Finishing step: strap the kayak (strapping it up well makes it easier to put it in the bag)
What if the kayak is pierced?
It would take something sharp for this to happen, so take care during use and when boarding.
If so, the kayak is composed of 5 independent “air chambers”. 1 or 2 of punctures? The kayak floats enough to make it back to the shore safely.
To preserve the life expectancy of your kayak, we advise you to avoid contact with oyster shells and sharp reefs.
A kayak repair kit is available with the reference 8512384
Directions for use
To extend the life of the kayak, it is best not to suck the air out with a pump when deflating.
We recommend that you use the product with a buoyancy vest.
Which regulations apply to kayaks > 3.50 metres?
Your canoe/kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is approved for sea use by the manufacturer.
You can then go further than 300 metres and up to 6 nautical miles from shelter. You must carry a number of items of safety equipment.
You can find a list of these items via this link: https://conseilsport.decathlon.fr/reglementation-pour-faire-du-canoe-kayak
What is it made of?
Dropstitch is a weave of polyester fibres sandwiched between 2 layers of PVC. When inflated to high pressure, the threads are stretched and the construction becomes very strong, thus avoiding any deformation.
This is what makes our inflatable kayak extremely rigid but easy to stow in a backpack once deflated.
The kayak X900 is made of reinforced Dropstitch (double thickness) for greater strength and rigidity.
A small adjustment for great comfort on board.
If you are less than 1.75m tall, the kayak’s rudder adjustment may not be ideal. No need to worry: you just need to adjust the cables a little for smooth steering. Here’s how to adjust it:
1. Make a 2nd loop on each cable, ~5 cm from the first.
2. Pass the rudder through these loops without cutting the cables.
3. Test and adjust until you have good control.
4. (Optional) Trim the excess and burn the ends to prevent fraying.
Condition EXCELLENT
- complete equipment - 100% safe and functional (waterproofing, flotation...) - the product may have minor aesthetic defects (scratches, dents...) - the packaging, if it exists, may have one or more defects
Control checkpoints
All our 2nd life products have been checked, reconditioned and repaired by our technicians.
- Transport bag
- Seat(s)
- Bungee cord
- Seat attachment loops
- Hull of the canoe-kayak
- Ailerons (fin)
- Carry handles
- Drain plug
- Valves
- Bladders
- Valves
- Aesthetic condition of the boat
