| Using the binding when going uphill |
Hold the front of the boot at a slight angle, and once the metal holes on the boots are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.
When climbing:
- Lift the black plastic part up to lock your binding.
- Turn the heel pad to avoid clipping in the back of the boot.
- Turn the heel pad to find the correct heel lift. |
| Using the binding when going downhill |
Hold the front of the boot at a slight angle, and once the metal holes on the boots are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.
When descending:
- Leave the black plastic part down so that it can be triggered in the event of a fall.
- Turn the heel pad to clip the back of the boot.
- Clip in with a sharp movement. |
| Binding release standard |
Warning, many cross-country ski bindings are not standardised.
The binding releases with a spring.
The standard follows the DIN scale.
In theory, an 80 kg skier will adjust their binding to the number 8 graduation. In reality, they will have to take into account their skiing level, physical fitness and snow conditions. |
| Adaptability. |
bindings sold without ski brakes, ski brakes cannot be added later.
Compatible with Dynafit or Wedze crampons.
Sold with a ski leash to connect the boot to the binding. |
