Men's Hiking Lightweight Waterproof Jacket MH150
At the foot of the Mont-Blanc, our team of enthusiasts designed this waterproof jacket to protect you during your occasional mountain walks.
Waterproof your hiking experience with our new waterproof jacket. Designed at the foot of Mont Blanc, this lightweight and breathable jacket will keep you dry during mountain hikes.
BENEFITS
Anatomic design
Drawcord at jacket hem. Elasticated cuffs. Adjustable hood
Lightweight
Only 490 gr in size L
Waterproof
Storm protection 2.5 layer membrane, 15,000 mm H²O (Schmerbers)
Pockets
2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket
Breathability
Perspiration wicking component (RET=10)
TECHNICAL INFORMATIONS
Cut
Standard cut. The inner volume allows you to wear it over a warm 2nd warm layer such as a pullover or fleece.
Hood
Adjustable height with an elastic cord and tightening toggle.
Adjustable depth using a Velcro strip positioned at the back of the hood.
Visor at the top of the hood for good face protection.
Main component
2.5 layer design: The membrane is glued under the outer fabric and protected inside by a fine film. We use it for lightweight jackets.
MEMBRANE
The waterproof rating of a product depends on the following two main criteria: its component and its construction.
This product was made with a membrane.
This is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable.
It has the advantage of being flexible, lightweight and breathable.
LAYER DESIGN
2.5 layer design: The membrane is glued under the outer fabric and protected inside by a fine film. We use it for light jacket.
COMPONENT WATERPROOFING
Laboratory tests are conducted to guarantee the waterproof rating of a component. To this end, the resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the JIS 1092 standard). The higher the water pressure, the more waterproof the fabric.
This product's component has a 15,000 mm waterproof rating and can withstand the pressure of a 15,000 mm water column. This is also equivalent to 15000 Schmerbers.
JACKET WATERPROOFING
We conduct laboratory tests that simulate rainfall scenarios in order to guarantee the jacket's waterproof rating. This garment has been subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
BREATHABILITY
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: not very breathable fabric
This product was assessed at 10 RET
HOW TO RESTORE THE WATER-REPELLENT PROPERTIES
A fabric is water repellent when it allows water slide over its surface without seeping in. The fabric does not soak up water and therefore remains lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. The water-repellent property can be reactivated by putting the jacket in the tumble dryer for 10 minutes on low heat.
You can also use the waterproof spray (ref 8554908)
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Membrane: 100.0% Polyurethane; Sleeve lining: 100.0% Polyester; Pocket: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always make sure this waterproof jacket is completely dry before storing it.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (3D analysis in particular) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.