Diving Mask - 100 SCD Blue
Snorkelling and scuba diving enthusiasts looking for a mono-lens mask with a silicone strap.
An ideal diving mask for scuba diving beginners, with its extremely flexible skirt and finger supports to help when learning the right technique for emptying the mask.
BENEFITS
Robustness
Single-window, scratch-resistant tempered glass.
Field of vision
Vertical field of vision: 90° (M). Horizontal field of vision: 103° (M).
Adjustable
Buckles on the skirt, so that the mask can be folded.
User comfort
Flexible silicone skirt. Available in 2 sizes (M/L).
Internal volume
internal volume measured by our advanced specialists: 186 cm3
Instructions
Download it hereTECHNICAL INFORMATIONS
The ideal mask for beginners.
The frame of the SCD 100 mask (support zone between the window and the skirt) is well clear of the face to better absorb variations in pressure when diving.
The specially designed zones on the frame on the forehead and temples allow divers to position their fingers properly so they can learn how to empty the mask more easily.
How to choose the right mask size
You need to position your mask on your face without the strap, and press with your hands to make sure it’s firmly in place, blocking your breath.
If the mask "suctions” properly, and stays stuck to your face, it’s perfect and means that it is your size and will be watertight.
If it unsticks and falls off, that means that air is getting through, and so water will get in, so you’ll need to try another size or another mask.
Prevent the appearance of fog in your mask WITHOUT anti-fog treatment.(8483961 and 8611264)
New mask: Wash your mask with washing-up liquid and warm water, using your fingers, to remove any grease. Do not use a sponge.
Before each use, spit into your mask and wipe the lens with your fingers to rinse the mask.
Dampen your face with the water to limit heat loss between the skin and the lens of your mask, as this will reduce mist.
Use an anti-fogging spray to completely eliminate mist.
How to use your mask with anti-fog treatment (8882790)
Simply submerge your mask in water before each use.
If it starts to fog up during use, gently rub the inside of the mask with a little water.
Remember to thoroughly rinse your mask with clean water after each use.
Store your mask in a dry place away from light.
Silicone skirt
The mask skirt (the supple part of the mask in contact with the face) is made from silicone, an extremely supple material. A silicone skirt gently adapts to the contours of the face, improving the seal. This supple mask is very comfortable.
Tempered glass lenses
Tempered glass is two to five times more durable than traditional glass. If it shatters, it breaks into small pieces, reducing the risk of a major accident.
It has the advantage of better scratch resistance compared to a polycarbonate lens.
Mask adjustment
Micrometric buckles together with the notched strap on either side of the mask allow easy adjustment of the mask, even when wearing gloves.
Mask dimensions (size M)
Width: 15.5 cm.
Height: 9.5 cm.
maximum height of the strap: 6 cm
length of the strap: 57 cm
Accreditation
Mask certified compliant with safety requirements according to European EN 16805 standards. Certified by the INPP (French professional diving institute) in Marseilles.
COMPOSITION
composition
Lens for diving: 100.0% Glass Mineral; Skirt: 100.0% Silicone; Frame for skiing: 90.0% Polycarbonate, 10.0% Stainless Steel; Strap: 100.0% Silicone; Buckle for diving: 100.0% Polycarbonate
Tips for storage and maintenance
Storage tips
Store in a dry place away from light.
Restrictions on use
Do not dive head first into the water while wearing mask.
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France).
Warranty
2 Years
Agree by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye, France. The centre uses SUBEA equipment throughout the year. The team of instructors is rigorously involved in the development of our SUBEA diving products: from the design phase with the SUBEA team (product manager, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).